Refer to this post to learn 6 practical solutions if you encounter the error “Invalid media or Track 0 bad – disk unusable” when trying to format a drive or memory card. They’ll assist you in quickly resolving this issue.
You frequently need to format your storage devices, including hard drives, USB flash drives, SD cards, etc. Windows may occasionally be unable to format your media and will notify you that the disk is unusable due to “Invalid media or Track 0 bad.” In this case, you can continue reading to discover 6 sensible fixes for this mistake.
At times, this error stems from write-protection. The USB flash drive, for instance, has a tiny switch on the side. The USB drive is write-protected if the switch is on. In this case, you won’t be able to write to it or properly format it. As a result, you must now turn off the switch to disable write protection.
When using the “format” command line in the Windows system’s Command Prompt, this error occurs. Why don’t you try one of the other formatting utilities that Windows offers, such as “Quick Format” in the drive’s “Properties” or “Format” in “Disk Management,” now that formatting is failing in Command Prompt?
3.5″ Floppy track 0 bad fix
Before the Fix: Recover Data from the External Storage Device
You might be worried about the files on the hard drive before implementing the fixes. If Windows can still recognize and detect the disk properly, you can take advantage of the last chance to recover files from memory cards or other devices that are reporting the error “Invalid media or Track 0 bad – disk unusable.” You can recover data from the problematic device using the free data recovery software called EaseUS Data Recovery Wizard.
Step 1. Choose and scan the external hard drive
Step 2. Check the scan results
Step 3. Preview and recover data
What Causes “Invalid media or Track 0 bad”
Minor flaws or significant physical damage to the device could be the cause of the problem, which could include:
Analysis on “invalid media or track 0 bad” error message
When you attempt to format a hard drive, it may occasionally fail and display the error message “invalid media or track 0 bad-disk unusable,” which denotes that the disk was either not detected by your computer or had a bad track 0.
However, the following problems may be what causes it:
> hard drive connection gets loose.
> disk partition does not have a drive letter.
> there is a bad sector on the disk.
> boot partition table gets lost or damaged.
How do I fix invalid media or track 0 bad disc unusable?
- Check USB connection.
- Disable write protection.
- Format the drive to another file system.
- Use cmd to format.
- Rebuild MBR.
- Remark track 0.
- Repair bad sectors.
- Send for repair.
How do I fix Windows was unable to complete the format?
- Method 1. Scan your computer for malware.
- Method 2. Use the Command Prompt.
- Method 3. Use Disk Management.
- Method 4. Check and fix Disk Errors.
- Method 5. Disable write-protection.
- Final thoughts.
- Related Articles.