How to Make Your Own Village in “Minecraft”

HutSee also:

  • 59 planks
  • 3 glass blocks or panes
  • 1 wooden door
  • 20 wood
  • Torches or glowstone
  • 1 Bed
  • Excavate a 5 by 5 area, then insert 25 planks there.
  • Chop out the corners and replace them with wood.
  • Pillar jump 4 times on each corner.
  • Planks should be used to cover the walls before the glass is put in place of the block in the center.
  • Get rid of the middle and lower blocks. Place the door from the outside.
  • Finish the roof.
  • Light up the inside and outside with torches or glowstone.
  • Place a bed inside.

Breeding huts

a quick way to construct structures that will increase the population of your villagers Theyre designed to be practical more than attractive, though.

  • Place 10 beds.
  • Place a bell where villagers can gather.
  • Install at least one Composter to force at least one villager to take up farming as a profession.
  • Create some farmlands by digging a hole and filling it with water, then give the farmer some seeds (such as wheat or beetroot), potatoes, or carrots so they can plant and harvest crops to share with other villagers, which will encourage them to breed.
  • Decorate the building if desired.

Another way to do this:

  • Make a walled 6 x 6 square with your building materials.
  • Place 1 door for the entrance, then a row of cobblestones, then another door.
  • Transform two zombie villagers back into villagers.
  • Place two beds
  • The villagers sleep inside at night (they won’t breed if the villagers don’t want it)

Trading hall

In the advanced version, you can construct a sizable structure to house (imprison) numerous villagers for easy trading. Design and appearance are up to you, but entry should be barred by fence gates or iron doors to prevent escapes, and the entire building needs to be well-lit and otherwise protected from invading monsters. The cubicles at the center of the trading hall are where the villagers live.

These can be divided by walls, fences, or blocks, and there is a fence-gate for you to enter or exit while allowing villager access. Each of these must have a minimum of four floor blocks: two for a bed, one for a worksite, and one for the villager to stand. The area that is left open should be between the bed’s head and the fence gate. Three-block ceilings are necessary to allow for the movement of iron golems and the reproduction of villagers. Once you have enough resources, you can also add beds to the majority, if not all, of the Villager rooms in the Trading Hall. You could also have a large dormitory or “breeding hall” where you can raise unemployed villager children. Use trapdoors to block any ladders and fence gates to block any stairs you might need.

You should set up defenses for Artificial Villages as well, and you can do so before bringing the first Villagers there (note: if you already have an Artificial Village populated with Villagers, refer to regular Village Defenses). Artificial Villages can be attacked by zombie sieges and illager raids as well.

To begin with, you must construct a wall around the area where the fake village will be located. There is no rush when the player chooses the terrain, so you can include erratic terrain to your liking. However, make sure to include safety features for the villagers, such as lakes/rivers, lava lakes (which are crucial), caves, and two block or more holes or four or more block drops. Additionally, be sure to use fence gates to enter and exit the walled area. You would be safer if you placed a few blocks away from the top of the wall so that spiders can’t climb in.

The area inside the Village needs to be lit up next if you want to reduce the number of nighttime hostile mob spawns. Next, be sure to hang at least one bell from the wall, keeping it far enough away from the wall. Then, confirm that there are at least 10 beds inside the wall. (If the beds are not already moved, it is advised to do so later in houses with wooden doors. ).

Next, it is time to bring in the villagers. spawn an iron golem inside of at least two of them, and don’t forget that boats are another way to kidnap iron golems. Once there are at least five Villagers (more if the enclosure is more than 80 blocks long, wide, or tall (only include tall if you use the air for a multi-level village), perform some rapid breeding or bring in more Villagers.

After that, you are free to construct the village as you please, but make sure that all adjacent areas are also walled. Also, don’t demolish the old wall until the new walls are up and the adjacent area is well-lit.

Additionally, you can use blocks to spawn iron golems to protect the villagers from hostile mobs. Placing four iron blocks in a T shape with a carved pumpkin on top will cause iron golems to spawn. Iron golems spawned this way will not attack the player. When a villagers runs away from a zombie or when they gossip, iron golems can also spawn.

Obtaining villagers

There are two standard methods for gathering villagers from the local natural environment. Villagers are difficult to control once they are free, but you can guide them by setting up a job site block for them. Once they have arrived at the block and chosen a profession, you can break the job block and move it to a new location. Once you’ve actually traded with a villager, they can’t change their profession, so you’ll need the appropriate job-site block for them. Place the job-site block for the profession you want them to have after you’ve installed them in their home, and then trade with them to permanently grant them that profession.

Kidnapping from a village

Using a boat to transport villagers from the nearby village to a more practical location is a simple way to obtain them. Boats can be moved on level ground (without water). A villager can be forced into the boat by being pushed into it or driven into it, and once inside, they won’t get out until the boat is destroyed. However, boats can move only downward but not upward. However, you can use a piston and a redstone torch to lift a boat.

Curing a zombie villager

Another method to obtain a villager is to capture and cure a zombie villager. Zombie villagers can occasionally be found anywhere in the overworld, such as in abandoned villages or the basements of igloos. To hunt them, it is advised to set traps (such as sizable holes that are two or three blocks deep). They don’t spawn in other situations where typical zombies might; g. from spawners, or when a zombie or zombified piglin is attacked and spawns a reinforcement

When discovered, zombie villagers must be held captive and kept under a roof (or submerged in water) to keep them from scorching in the sun. A golden apple and a splash of the Weakness potion will cure them. They can now be transported to their village using minecarts, though it is advised that they first establish their village nearby.

You can also establish your own village in a snowy biome if you haven’t already by looking for an igloo with a basement. Using this approach, you can dependably establish your own village in a snowy biome. A cleric and a zombie villager (in Bedrock Edition, the villager can have any profession) can be found in the igloo’s basement. You can use Minecarts or an upward-facing Bubble Column to transport the two villagers you create by healing the zombie villager to the top of the igloo. One of them changes into a leatherworker as a result of the cauldron serving as their job site block.

Then, surround the two villagers with at least six functional beds and feed them three pieces of bread each to make them “willing” to reproduce. You can make a straightforward infinite villager breeder after the two villagers breed and produce a baby villager. Noting that villagers must also rest at home, sleep, gossip, and work (or wander around if they’re a nitwit), it should be noted that they cannot reproduce indefinitely without stopping. Additionally, they need food in order to be willing.

One can repeatedly add more houses to the village to allow the villagers to breed more and create more villagers if they want to get more villagers (and a blacksmith, just place their job site block; smithing table for toolsmith, blast furnace for armorer, and grindstone for weaponsmith). Additionally, if the locals engage in a lot of gossip, an iron golem may appear and serve as a source of iron or a defense mechanism.

Please be aware that your village is more vulnerable to a zombie siege the bigger it is. The player must be present in the village and there must be at least 10 beds or 20 villagers for a zombie siege to happen.

Be careful when creating a village in a biome where illager patrols can spawn; while walls and fences can easily keep them out, they will try to kill your villagers, and killing the patrol captain will cause a raid on your village. If at all possible, let an iron golem kill the captain; otherwise, arm yourself with a milk bucket and/or attempt to kill everyone else except the captain (if you unintentionally kill the captain in the village, immediately consume the milk and pray for the best). Once they are dead, kill them, have the captain drink the milk, and then bring him back to the village after traveling for over 32 blocks from the nearest bed. The captain could be placed in a trap, such as a hole in the ground.

  • As much as you can, recreate the natural village structures. However, adding more temples won’t increase the number of clerics because brewing stands serve as a clerics job site block. More villagers simply means that the children born have an equal chance of pursuing any of the professions that rely on the village’s construction site blocks.
  • You might be interested in constructing a villager farm because they generate villagers at incredibly high densities, making it worthwhile to enclose the entire villager farm to keep out hostile mobs and make it simpler to light up and navigate.
  • Villagers tend to be careless. They have the ability to damage cacti, fall from great heights, and even swim in lava pools. Place fences or any other type of barricade (apart from cacti, fire, or lava) to keep people out of these areas as much as you can.
  • To make the village more beautiful, you can add fountains, trees, parks, and other things.
  • Villagers fail to disperse when night falls so that each one enters a different house. Villagers look for unclaimed beds, so if they can’t find any, most of them will probably be unable to enter the safety of their homes. One can build a large house with multiple beds to avoid this However, sleeping before hostile mobs spawn is another method of protecting them.
  • Create lamp posts. This reduces the number of mobs that spawn. A typical lamp post in a plains village consists of two fences, a block of stripped oak wood on top, and torches on the sides of the wood. Another design might include acacia fences with a torch on top of them (for a savanna village), terracotta on top of two cut sandstone with a torch on top of terracotta (for a desert village design), a cobblestone wall with a torch on it (for a taiga and snowy taiga design), and a 3 block high sided fence made of spruce with 1 to 4 lanterns attached to When you have pumpkins, you can make jack-o-lanterns (the Wandering Trader can assist).

Sample Village Buildings

This information is about a sample village and its buildings. You can either build them with a different material or take inspiration from these straightforward designs.

WellLayer -5 Layers -4 – 0 Layer 1 Layer 2 Layer 3 Layer 4

Note: Modify the villagers’ job site block’s crafting table. Layer 0 Layer 1 Layer 2 Layer 3 Layer 4.

Note: Switch out the anvil for a job site block, preferably one designed for trades like weaponsmithing. Layer 0 Layer 1 Layer 2 Layer 3 Layer 4.

Note that you could also use Layers 0 through 4 in this manner.

Stone Hut

Note: replace the anvil with the job site block

Layers 0 through 4: | Layers 0 through 1

Note: you can replace the wheat with any other crop. Layer 0 Layer 1.

Other decorative buildings

Layer 0 Layer 1 Layer 2 Layer 3 Layer 4 Roof (1) Roof (2) Roof (3) Roof (4-5) Roof (6) Substitute a custom flag for the red wool.

Build a building with multiple rooms. This is merely for aesthetic purposes because villagers cannot enter.

The wool in the hotel room (example) can be changed to any color you like, but the downstairs ceiling must have two layers. Layer 0 Layer 1 Layer 2 Layer 3 Ceiling.

Inaccessible to villagers as they cannot get in. You must use a boat or minecart to transport the villagers inside, then lock the door after they are inside.

Alternately, it can be used to confine zombie villagers in order to resurrect them as human villagers.

The bed can be any color

Example of a Jail Cell: Layers 0, 1, 2, 3, 4, and 5 (Optional)

Decorative: Teach villagers how to work. Dont forget the classrooms and lockers.

Layer 0 Layer 1 Layer 2 Layer 3 Ceiling in the classroom (farming)

Hallway: To lengthen the hallway, replace the terracotta with classrooms and add more lockers Layer 0 Layer 1 Layer 2 Layer 3 Layer 4

Honey House

Advice: crop growth is accelerated by the presence of beehives nearby. Layer 0 Layer 1 Layer 2 Layer 3 Layer 4.

Village House Additions (Recommended for large house)

Grill: Layer 0 Layer 1 Layer 2 Layer 3


The carpet can be any color Layer 1 Layer 2

Alternate version: Baby villagers can jump on it.

Dont let a villager sleep inside it. Layer 1

Stable (pig or horse) Layer 1 Layer 2-4 Layer 5

Layers 0 through 3 Layers 4 to 5 Layers 6 to 7 Layers 8 to 9 Layers 10 Spleef arena (only for very large homes and mansions) (Remove scaffolding after everyone is on the snow layer, before the game begins)

Minecraft Bedrock: Villager Breeding Guide! (EASY) Repopulate villages! Breed Villagers Xbox,PC,PS4


How do you populate an empty village in Minecraft?

Players must force a villager into a boat before navigating to the deserted village. Players will need to finagle their boat onto the land and push the villager into it there if there isn’t any water nearby.

Can I spawn a village in Minecraft?

In any update that comes after 1 you only need to breed villagers. 14 is a large enough room with three beds, and after providing each villager with enough nutritious food, they produce a baby villager.

How do you multiply villages in Minecraft?

A village will not repopulate once all of the residents have passed away. You can revive villagers using mods but thats it. To repopulate the village after you revive one, you must also revive two more.

Leave a Comment